Single Cell |
Model |
GLP50Ah |
|
Capacity (0.5C) |
50Ah |
||
Rated voltage (V) |
3.2V |
||
Typical impedance (mΩ) |
≤2.0m |
||
Battery material |
LiFePO4 |
||
Weight (lb) |
Max 2.2 lbs |
||
Cycle life (1C) |
About 3000 times |
||
Battery Pack |
Combination method |
24S3P |
|
Minimal capacity (0.2C/ 0.5C) |
150Ah |
||
Nominal voltage |
76.8V |
||
Max. charge voltage |
87.6±0.2V |
||
Discharge cut-off voltage |
62.4±0.5V |
||
Max charge current |
75A (15℃–35℃) |
||
Max discharge current |
150A |
||
Standard charge current |
50A |
||
Standard discharge current |
75A |
||
Maximum output current of DC12V interface |
≤8A |
||
Weight (Approx) |
≤203 lbs |
||
Max. Dimension (L×W×H) (in) |
≤40*12*11 in |
||
Enclosure IP grade |
IP54 |
||
Operating temperature |
Charge temperature |
0℃~55℃ |
|
Discharge temperature |
-20℃~55℃ |
||
BMS |
Single cell over-charge cut-off voltage |
3.65±0.02V |
|
Over-charge release voltage |
3.4±0.05V |
||
Single cell under-discharge cut-off voltage |
2.60±0.2V |
||
Under-discharge release voltage |
2.70±0.1V |
||
Continuous operating current |
150A |
||
Max operating current&time |
350A (5sec) |
||
Over-discharge cut-off current |
300±5A |
||
Over-discharge cut-off current delay |
≤30s |
||
Short-circuit protection |
Yes |
||
Short-circuit protection delay |
500±300uS |
||
Recovery of over-current and short-circuit |
Automatic recovery after load removed |
||
Balance current |
≤30mA |
||
Balance Condition |
3.40V |
Ambition 87.6v 12amp Fully Sealed Charger
Specification of 1200W Waterproof Series
LiFePO4 Battery Charger
Battery Charger 1200W-72 can work normally under 87.6Vdc/12Aand with reverse polarity
protection.
*Max output voltage 87.6V± 0.2V
*Output current 12A ± 2%
*Max. output power 1051.2W
*Input voltage 110Vac
*Input voltage range 100 ~ 130Vac
*AC input voltage frequency 50~60 Hz
Submit your review | |
Reviews
There are no reviews yet.