Single Cell |
Model |
GLP60Ah |
|
Capacity (0.5C) |
60Ah |
||
Rated voltage (V) |
3.2V |
||
Typical impedance (mΩ) |
≤1.0m |
||
Battery material |
LiFePO4 |
||
Weight (lb) |
Max 2.6 lb |
||
Cycle life (1C) |
About 3000 times |
||
Battery Pack |
Combination method |
16S1P |
|
Minimal capacity (0.2C/ 0.5C) |
60Ah |
||
Nominal voltage |
51.2V |
||
Max. charge voltage |
58.4±0.2V |
||
Discharge cut-off voltage |
41.6±0.5V |
||
Max charge current |
60A (15℃–35℃) |
||
Max discharge current |
60A |
||
Standard charge current |
30A |
||
Standard discharge current |
30A |
||
Maximum output current of DC12V interface |
≤8A |
||
Weight (Approx) |
≤62 lbs |
||
Max. Dimension (L×W×H) (in) |
≤11*10*10 in |
||
Enclosure IP grade |
IP54 |
||
Operating temperature |
Charge temperature |
0℃~55℃ |
|
Discharge temperature |
-20℃~55℃ |
||
BMS |
Single cell over-charge cut-off voltage |
3.65±0.02V |
|
Over-charge release voltage |
3.4±0.05V |
||
Single cell under-discharge cut-off voltage |
2.60±0.2V |
||
Under-discharge release voltage |
2.70±0.1V |
||
Continuous operating current |
60A |
||
Max operating current time |
150A (5sec) |
||
Over-discharge cut-off current |
120±5A |
||
Over-discharge cut-off current delay |
≤30s |
||
Short-circuit protection |
Yes |
||
Short-circuit protection delay |
500±300uS |
||
Recovery of over-current and short-circuit |
Automatic recovery after load removed |
||
Balance current |
≤100mA |
||
Balance Condition |
3.40V |
||
Display |
SOC |
FSIP 58.4V 20amp non-sealed Charger
Power from 180W up to 1050W
· Current from 15A to 20A
· Active PFC
· Charging cycles information through USB (optional)
· Extra power version available (CBHF2-XP)
Submit your review | |
Reviews
There are no reviews yet.