Endurance 36v/100ah Battery Pack w/ Endurance 43.8v 20amp Fully Sealed Charger

ENDURANCE BATTERY SPECS

36v 100ah

Specification of 1200W Waterproof Series
LiFePO4 Battery Charger
1. General
Battery Charger 1200W-36 can work normally under 43.8Vdc/25Aand with reverse polarity
protection.
2. Electrical Specification
2.1 Main product specification
No. Item Technical specification Remark
1 Apply to Battery □Li-ion Lifepo4 □Lead acid
2 Max output voltage 43.8V± 0.2V
3 Output current 25A ± 2%
4 Max. output power 1095W
5 Input voltage 110Vac
1
2.2 Input characteristic
No. Item Technical specification Remark
1 Rated input voltage 110Vac
2 Input voltage range 100 ~ 130Vac
3 AC input voltage frequency 50～60 Hz
No. Item Technical specification Remark
1 CC(constant current) 25A
2 CV(constant voltage) 43.8Vdc↓
3 Transition Current 1.25A
4 Power efficiency ≥90% Vin=110Vac,rated load
2.3 Output characteristic or charge stages
2
2.4 Protection characteristics
No. Item Technical specification Remark
1
Over voltage
protection Yes
2
Software over
voltage protection
The charger software limits the maximum output voltage to a
level suitable for the connected battery system.
3
Thermal
protection
Aluminum shell the inside temperature＞65℃，
4
Current limiting
protection Yes At CC
mode
5
Short circuit
protection
Short circuit protection should be automatically recovery after
remove the condition.
6
Reverse polarity
protection
When output wires are reversely connected to the battery the
charger will not operate and will work normally when DC
wires are correctly connected.
2.5 Charging indicator
No. Item Status Remark
1 Charging (＜80%) Red
2 Charging (＞80%) Yellow
3 Fully charged (100%) Green
4 Charging Voltage Display NO
5 Charging Current Display NO
3.Environmental condition
No. Item Technical specification Remark
1 Operation temperature -20～+45℃
2 Humidity 5～95%
3 Storage temperature -40～+70℃
4 Altitude 0～3000m
5 Cooling
filled with glue inside and
fan outside
3
4. Safety & EMC
5. Environmental testing requirements
No. Item Standard (or test condition) Remark
1
Electric
Strength test
Input-Output
1500Vdc/1min ≤10mA
It should be able to withstand
1500V DC voltage for 1 minute,
leakage current ≤ 5mA,
without breakdown or arcing
Input-Earth
2 Isolation resistance
Input-Output
≥10MΩ@500Vac
Input to output, input to case
500VDC & normal air
pressure, relative humidity
90%
Output-Shell
3 EMI
Conduction □EN55014 □EN55022 150k~30MHz
Radiation □EN55014 □EN55022 30M Hz~1GHz
Power Clamp □EN55014 □EN55022 30M Hz~1GHz
4 Safety CE ROHS
No. Item Technical specification Remark
1 Waterproof IP67 Features OK
2
High temperature
ambient operating +40℃ Features OK
3
Low temperature
ambient operating -20℃ Features OK
4
High temperature
storage +70℃
Work normally after recovery under
normal temperature for 2 hours
5
Low temperature
storage -40℃
Work normally after recovery under
normal temperature for 2 hours
6 Random vibration 20Hz to 2000Hz 3Grms 20hours per
axis
7 Repetitive shock 40g peak 3 orthogonal axes, 3+ and
3- in each axis, 11ms pulse width
8 Thermal shock -35℃ to 75℃, ＜3min transition,
2.5hours dwell, 200cycle
9 Drop test
BS EN60068-2-32:1993 TEST ED:
free fall appendix B
4
6. Mechanical characteristic
7. Package, transportation & storage
7.1 Package
There is product name, model, name of manufacturer, safety approval, serial number, User
Manual and packing
list in the package box.
7.2 Transportation
Suit for transportation by truck, the products should be shielded by tent from sunshine, and
loaded and unloaded carefully.
7.3 Storage
Products should be stored in package box when it is not used. And warehouse temperature
should be -40~70℃, and relative humidity is 5~95%. In the warehouse, there should not be
harmful gas, inflammable, explosive products, and corrosive chemical products, and strong
mechanical vibration, shock and strong magnetic field affection. The package box should be
above ground at least 20cm height, and 50cm away from wall, thermal source, and vent.
Under this requirement, product has 2 years of storage period, and should be rechecked
when over 2 years.
No. Item Technical
specification Size Remark
1 Shell material Black Aluminum L*W*H：
280*176*87mm
2 Input socket / AC wires: 1.5m
3 Output socket / DC wires: 1~1.5m
4 Net Weight 5.5KG /
5
8. Reliability requirements
No. Item Technical specification Remark
1 MTBF MTBF no less than 20000 hours (25 degrees C, Full load
and rated voltage input)
2
Burn-in and Life
test
At ambient temperature 25 ℃ aging in two hours, she